|
WEmulsion For Aqueous Textile Printing Adhesive
HD-PA818
Composition: Acrylic Copolymers, Water
Spicification:
| 1 |
Appearance |
Milky liquid |
2 |
solid(%) |
45+1 |
3 |
PH Value |
7-7.5 |
For producing aqueous textile printing adhesives;
Using the emulsion as textile size.
Typical properties:
Using the emulsion as adhesive, the textile printing have excellent resistibility for washing-up, good elasticity, soft feel, never sticky after printing, color and luster are fresh.
Application:
Textile printing be heated up with iron at 150℃ for 10 second or blowed with hot wind at 150℃ for 2 minute。
Only after adequately heating, can printings show the best properties.
Package and Storage:
Package: 50 Kg/barrel
Storing requirements: 0~40°C, Sealed and stored in a shady place.
Storage time: available storing time for HD-PA-01 is 6 months from the day of its producing , products stored more than 6 months need to test its qualities and can be used if it was eligible.
Note:This specification of the product is provided according to our present knowledge, it might be improved. It is suggested that some tests should be taken before the application of the product for the best using of it.
Address: Zhongmensi Street 14, Mentougou District, Beijing, P. R. China, 102300
Tel: 86-10-69841074 69863727 Fax: 86-10-69868459
Website: www.jinhuili.com Email: sales@jinhuili.com
|
